Busch+Müller IQ-XS High Beam E 9V - 48V DC 150 Lux E-Bike Front Light

Key Features:

• High beam headlight
• Extensive light field and light at close range
• For E-Bike / pedelec batteries 9 - 48 V DC supply
• Low beam mode: 100 Lux - 7 Watt
• High beam  mode: 150 Lux - 11 Watt
• Aluminium housing
• With switch & 65cm cable
• Ergonomic handlebar button
• Screw on front reflector
• Stainless steel bracket
• Connector cable
• Pushing the handlebar button activates 150 Lux high beam light
• Requires at least 11 W nominal output of the drive system's light connection
• Weight: 120 g
• Approved by German road traffic regulations but Not approved for speed E-Bikes

For use with E-Bikes only ie NOT dynamo driven

The IQ-XS High Beam model has been upgraded making it even brighter than before and also has a high beam option. Its low beam light shines far, widely and very homogenously with 100 Lux and guarantees premium vision directly in front of the E-Bike as well as up to a distance of 50 metres. A sharp light/dark boundary prevents the glaring of oncoming traffic. One push of the ergonomic button activates high beam mode. The high beam 150 Lux output breaks boundaries and shine even farther, wider and higher. 

This output is made possible by modern LED light technology contained in the compact black anodised aluminium casing. Sensor controlled DRL and lateral light emission considerably increase visibility and safety of the cyclist. The screw on front reflector and stainless steel brackets are standard issue.

Light At Close Range:

For a secure ride it is important to be able to see the road directly in front of the bicycle. Bumps or potholes in the road can be seen better if this area is lit and can be circumnavigated by short and intuitive steering. During darkness this is only possible if the area between one and four meters in front of the bicycle is lit brightly and homogenously. Subjectively the need for light at close range is higher the slower one is riding, because one's balance can more easily be influenced by obstacles. "With light at close range" means that the light field emitted by the Busch+Müller headlights starts directly one meter in front of the bicycle.

IQ Technology: The Light Revolution: 

Designed by Busch+Müller the core of IQ-TEC is the revolutionary idea to use a high output LED as an indirect light source. The complete reflective surface is used to focus and guide the light. If one looks into the reflector of an IQ headlight one only sees the metalised surface. Once the headlight is turned on what takes its place is "nothing but light" with superb efficiency and barely any wasted stray light. ​

Please note the following recommendations from Busch+Müller if you are planning to install your own E-Bike lighting system: 

• Establish and/or measure the voltage on the cables or connecting point intended for the connection. Make sure this is within the parameters of the light specification
• Establish and/or measure the polarity of the above mentioned connection and make sure to connect respectively to the correct pole using the instructions and/or the + / - signs on the light
• If you are not able to establish either of the above, or are not sure then please refer to your local electric bike specialist to install the lights for you