Kool-Stop International Inserts Blue Metal With Black Compound

Key Features:

• Alloy cooling fins
• Anodized high gloss finish
• High friction co-effcient = easy stopping
• Steady braking- Low fade
• Stops short - wears long
• Rim friendly
• Weight: ca. 58 g/pair
• Made in the USA

The pad that started it all. The International pad was the first pad produced by Kool-Stop and is where Kool-Stop got its name from. With circular fins which provide efficient cooling and less heat build up

The Black compound is for use in mainly dry conditions

Installation Instructions:

1. Clean the rim surface before installing new pads
2. Place the new Kool-Stop pads into the brake caliper arms and finger tighten the nuts
3. Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts.  Do not over tighten
4. Break In Pads.  Full stopping power may not develop until after several braking applications have conditioned the rim surface.  Proper "toe in" alignment prevents brake chatter
5. Check the pad and rim alignment after the pads are broken in and after every ride
6. Important: Do not ride the bike until the brakes are checked and functioning properly.  Designed for bicycle use only.  All Kool-Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards

Supplied as a pair