Kool-Stop Campi Weinmann Retro Inserts Black

Key Features:

• Weight: ca. 15 gr/pair
• 12 mm wide
• 9 mm at narrow section
• 40 mm length
• Made in the USA

These pads will look 'period correct' on your Campi brakes but will provide stopping power far superior to the standard inserts. These are excellent replacements for the classic Nuovo Record era 1970s-80s and most old school holders. They also fit Mafac and other shoe holders. The dovetail fitting is 12 mm wide, 9 mm at the narrow section. Overall length 40 mm

The special Black compound is for use in dry conditions

Installation Instructions:

1. Clean the rim surface before installing new pads
2. Place the new Kool-Stop pads into the brake caliper arms and finger tighten the nuts
3. Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts.  Do not over tighten
4. Break In Pads.  Full stopping power may not develop until after several braking applications have conditioned the rim surface.  Proper "toe in" alignment prevents brake chatter
5. Check the pad and rim alignment after the pads are broken in and after every ride
6. Important: Do not ride the bike until the brakes are checked and functioning properly.  Designed for bicycle use only.  All Kool-Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards

Two pairs supplied