Kool-Stop V2 Brake Holder With E-Bike Compound Grey

Key Features:

• Curved Aluminium holder
• Integrated Pad-Lock hardware
• Secured lock pin
• Thicker pad for longer pad life
• E-Bike compound
• Offset post
• Weight: 44 g/pair
• Overall length: 72.5 mm
• Pad contact width: 8.5 mm

Next generation V brake holder in a lovely titanium colour which are super light weight. Designed in anodised forged aluminium with thicker V2 Grey E-Bike compound inserts

Installation Instructions:

1. Remove the keeper pin from the holder
2. Slide out the old pad from the holder
3. Insert the replacement pad so that the notch lines up with the keeper pin holes in the pad holder.
4. Replace the keeper pin
5. Break In Pads.  Full stopping power may not develop until after several braking applications have conditioned the rim surface.  Proper "toe in" alignment prevents brake chatter
6. Check the pad and rim alignment after the pads are broken in and after every ride
7. Important: Do not ride the bike until the brakes are checked and functioning properly.  Designed for bicycle use only.  All Kool-Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards

Supplied as a pair