Supernova E3 Pro 2 Silver For Road With Multimount Front Dynamo Light

The E3 Pro 2 is the most popular dynamo light in the Supernova range. It is multi award winning and has been ranked first in many magazine reviews. Whether you are commuting to work or travelling through the remotest landscapes of the world its continuous brilliant light will make sure that you notice every shard of glass or pothole. The illuminated Supenova logo on the side of the light not only provides better visibility to keep you safe it offers wonderful aesthetic look for the light. The E3 PRO 2 with glare free lens provides you with a very wide, homogeneous carpet of light on the ground, even at low speeds. The light appears to be very bright because most of it is guided towards the ground. The beam also reaches far enough for fast riding

Technical Data:

• Glare free lens high beam road pattern
• Measured lumen value: 205 lumens
• Input voltage: 6 V AC Dynamo
• Standlight: 5 minutes
• Lens type: Terraflux 2
• Illuminant: Power CREE LED
• L x W x H: 65 x 40 x 40 mm
• Material: 6061 Aluminium
• Weight: 110 g without bracket
• Warranty: 5 years

​TERRAFLUX2 - Supernovas Best Lens To Date: 

After many years of development and improvements, the new Supernova TERRAFLUX2 lens now surpasses even the high demands of German road regulations. The TERRAFLUX2 technology is capable of guiding over 90% of the light beam onto the ground with greatest efficiency. This means that a considerably greater portion of the light can be used to illuminate the road ahead than with standard lenses. By optimizing the production parameters, Supernova have achieved an excellent homogeneous beam shape with an outstanding, far reaching light that has an unparalleled side illumination as well. The Terraflux2 lens is used in several Supernova lights. Its brilliance is an important part of the quality that makes Supernova lights special.

The Complex Production Method Explained:

The Supernova TERRAFLUX2 lenses are produced with an additional complex process of added holding pressure after the commonly employed injection of the molten PMMA material with up to 6500 psi. A die integrated into the tool exerts a high and uniform pressure directly onto the light exit surface of the lens while the molten mass is still liquid or while the temperature is still above the yield point. This allows Supernova to achieve a very homogeneous stress distribution inside the component, which gives the TERRAFLUX2 lens its excellent quality.