Kool-Stop V Brake Holder + Dual Compound Inserts

Key Features:

• Curved aluminum holder
• Integrated Pad-Lock™ hardware
• Secured lock pin
• Offset post
• Rim friendly compounds
• Multiple water displacement grooves
• Patented plow tip
• Weight: ca. 44 g/pair
• Overall length: 72.5 mm
• Pad contact width: 8.5 mm
• Made in the USA

The universal replacement V type holder is made from a forged alloy holder and can be used with all V type systems. These pads are easy to fit. Includes Dual compound inserts for all weather types including wet and muddy as well as for summer days. The Pad-Lock washer system has been improved to reduce the number of washers needed to achieve all spacing requirements

Installation Instructions:

1. Clean the rim surface before installing new pads
2. Place the new Kool-Stop pads into the brake caliper arms and finger tighten the nuts
3. Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts.  Do not over tighten
4. Break In Pads.  Full stopping power may not develop until after several braking applications have conditioned the rim surface.  Proper "toe in" alignment prevents brake chatter
5. Check the pad and rim alignment after the pads are broken in and after every ride
6. Important: Do not ride the bike until the brakes are checked and functioning properly.  Designed for bicycle use only.  All Kool-Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards

Supplied as a pair